Gurinder Engineering Works
Khan Kot, Amritsar, Punjab
GST No. 03BDYPS8249F1ZV
TrustSEAL Verified
Call 0804895619266% Response Rate
SEND EMAIL
Product Details:
| Length of Nail (inches) | 0.5 - 1.5 |
| Nail Length (cm) | 1.3 - 3.8 |
| WireGauge (SWG | 18 - 14 |
| Wire Diameter (mm): | 1.22 - 2.03 |
| Production per minute pieces | 400 - 450 |
| Power Required (HP): | 2 |
| Net / Gross Weight (Kg.): | 350 / 450 |
| Dimensions (m): | 0.65 |
| Shipping Volume (m3): | 0.65 |
CONSTRUCTION: The main frame is of high grade and all leavers and their components subject to heavy duty are all manufactured from high quality steel and designed with high safely factor.
MAIN DRIVE : Operating mechanism are to longer mounted on one commonshaft but on two auxiliary shifts thus eliminating long cutterleavers.The cutter slides move in substantial guides and
CRANK SHAFT : The crank shaft is carried in four bevel gears , the smooth ruining of the nail machine is thus ensured.
FEEDING MECHANISM : Operated by crank drive which reduces feeding speed. A screw controls the length of intake. The intake cutter is raised mechanically during back stroke so that its wear is considerably reduced.
EJECTOR: One ejector fitted with the punch ensures that the nails are ejected at the right moment, avoiding any bending of nails.
PRESSURE : The necessary pressure on grip of the dies is obtained shaft the roller
There are seven models of wire nail making machines to cut different length of nail with different gauge of wire.